ADJ HYD190, User Manual

Page: 14 / 52

14
Screw one clamp via an M12 screw and nut into the Omega Bracket. Insert the quick-lock fasteners
of the Omega Bracket into the respective holes of the fixture base plate. NOTE: The clamp must be
attached to the Omega Bracket before attaching the bracket to the fixture. Tighten the quick-
lock fasteners fully clockwise. Pull the safety-cable through the openings located on the bottom of
the unit and over the trussing system or a safe fixation spot. Insert the end in the carabine and tight-
en the safety screw.
NEVER stand directly below the fixture when rigging, removing, or servicing.
Always allow approximately 60 minutes for the fixture to cool down before servicing.
FIXTURE INSTALLATION