ADJ FOCUS SPOT 6Z, User Manual

Page: 28 / 40

28
PRIMARY-SECONDARY SET UP
This function allows you to link units together to run in a Primary-Secondary set-up, in which one
unit will act as the controlling unit and the others will react to the controlling unit’s built-in programs.
Any unit can be configured to act as a Primary or as a Secondary, but only one unit in a given sys-
tem can be programmed to act as the Primary.
Primary-Secondary Connections and Settings:
1. Daisy chain your units via the XLR connectors on the rear panels of each unit. Use standard XLR
data cables to link your units together. Remember that the male XLR connector is the input and
the female XLR connector is the ouput. The first unit in the chain (primary) will use the female XLR
connector only. The last unit in the chain will use the male XLR connector only.
2. Primary Unit: Use the display screen and control panel to navigate to Personality > Primary.
Select this sub-menu using the ENTER button, and use the arrows to toggle between ON and
OFF. Press ENTER to confirm your selection.
3. Secondary Unit(s): Use the display screen and control panel to navigate to Personality >
Secondary. Select this sub-menu using the ENTER button, and use the arrows to toggle between
ON and OFF. Press ENTER to confirm your selection. Repeat this step for all units that will oper-
ate in the slave mode setting.
4. The secondary units will now follow the behavior of the primary unit.