ADJ FOCUS SPOT 6Z, User Manual

Page: 10 / 40

10
INSTALLATION
Screw one clamp into each Omega bracket using an M12 screw and nut. Insert the quick-lock fas-
teners of the Omega holders into the respective holes on the bottom of the unit. Tighten the quick-
lock fasteners fully clockwise. Pull the safety cable through the openings located on the base plate
and over the trussing system or a safe fixation spot. Insert the end in the carabine and tighten the
safety screw.
When installing the unit, the trussing or area of installation must be able to hold 10 times the weight
of the unit and any attached accessories without any deformation. The unit must be secured with a
secondary safety attachment, e.g. an appropriately-rated safety cable. Never stand directly below
the unit when mounting, removing, or servicing the unit.
Overhead mounting requires extensive experience, including calculating working load limits, knowl-
edge of installation material being used, and perodic safety inspection of all installation material as
well as the unit itself. If you lack these qualifications, do not attempt the installation yourself.
The installaiton should be checked by a skilled person once a year.