manualshive.com logo in svg

ADJ ENCORE LP7IP, User Manual

Share
Download
ADJ ENCORE LP7IP User Manual Download Page 4

4

Unpacking: Thank you for purchasing the Encore LP7IP by ADJ Products, LLC. Every Encore LP7IP 

has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the 

shipping carton for damage that may have occurred during shipping. If the carton appears to be dam-

aged, carefully inspect your fixture for any damage and be sure all accessories necessary to operate 

the unit have arrived intact. In the event that damage has been found or parts are missing, please 

contact our toll free customer support number for further instructions. Do not return this unit to your 

dealer without first contacting customer support.

Introduction: The ADJ Encore LP7IP is a DMX intelligent, heavy duty Par. To optimize the perfor-

mance of this product, please read these operating instructions carefully to familiarize yourself with 

the basic operations of this unit. These instructions contain important safety information regarding the 

use and maintenance of this unit. Please keep this manual with the unit for future reference.

 

Customer Support: Contact ADJ Service for any product related service and support needs. Also visit 

forums.adj.com

 with questions, comments or suggestions.

Parts: To purchase parts online visit: 

http://parts.adj.com  

(US)

http://www.adjparts.eu  

(EU)

ADJ SERVICE USA - Monday - Friday 8:00am to 4:30pm PST

Voice: 800-322-6337 | Fax: 323-582-2941 | [email protected]
ADJ SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET 

Voice: +31 45 546 85 60 | Fax: +31 45 546 85 96 | [email protected]

ADJ PRODUCTS LLC USA 

6122 S. Eastern Ave. Los Angeles, CA. 90040

323-582-2650 | Fax 323-532-2941 | 

www.adj.com

 | 

[email protected]

ADJ SUPPLY Europe B.V

Junostraat 2 6468 EW Kerkrade, The Netherlands

+31 (0)45 546 85 00 | Fax +31 45 546 85 99 

www.americandj.eu

 | 

[email protected]

ADJ PRODUCTS GROUP Mexico

AV Santa Ana 30 Parque Industrial Lerma, Lerma, Mexico 52000

+52 (728) 282-7070

CAUTION! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself, 

as doing so will void your manufacturer’s warranty. In the unlikely event your unit may require service, 

please contact ADJ Products, LLC.
Do not discard the shipping cartoon in the trash. Please recycle when ever possible.

INTRODUCTION

Summary of Contents for ENCORE LP7IP































Reviews:

No comments

Brands by name

Popular brands

Load more brands