manualshive.com logo in svg

ADJ ENCORE LP7IP, User Manual

Share
Download
ADJ ENCORE LP7IP User Manual Download Page 27

27

SPECIFICATIONS

SOURCE:

•  Light Source: 7 x 20-Watt Quad RGBL LEDs (4-IN-1: Red, Green, Blue & Lime)

PHOTMETRIC DATA:

•  Beam angle: 10-degree

•  CRI: 84

•  CRI R9: 76.6

•  Lumens: 2500

EFFECTS:

•  Linear Color Temperature Control (2700K to 7000K)

•  Preset Color Temperatures (2700K, 3200K, 4000K, 5600K and 6500K)

•  16-Bit Fine Color Control (Red, Green, Blue & Lime)

•  64 built-in Color Macros

CONTROL / CONNECTIONS:

•  4-button, DMX digital display on rear panel

•  5 Operational modes: Static Color Mode, RGBL Dimmer Mode, Program Mode, and DMX Controlled

•  Supports RDM (Remote Device Management)

•  With Wired Digital Communication Network

•  6 selectable Dimming Modes (Standard, Stage, TV, Architectural, Theatre & Stage 2)

•  4 selectable Dim Curves (Linear, Square Inv. Squa, S-Curve) 

•  Adjustable Refresh Rate (14 presets from 900 – 25,000Hz) 

•  Flicker Free operation (No flickering on camera)

•  LED pulse and strobe effect 

•  Electronic Dimming: 0 - 100% 

•  6 DMX Modes: 4, 7, 8, 10, 13, & 16-channel 

•  Quiet fan mode

CONSTRUCTION:

•  IP65 Rated: Ingress Protection against liquid, snow, dust and sand

•  All metal construction

•  IP Rated rubber covers protect In/Out Locking Power connectors and IP rated 5-pin sockets

•  Locking, outdoor IN/Out Power connectors

•  Data linkable via 5-pin DMX connections

•  Includes Lens kit with 4 different beam angles

•  Scissor Yoke & safety eye

ELECTRICAL / THERMAL:

•  Multi-voltage operation: AC 100-240V, 47/63Hz

•  Daisy chain: 10 @ 120V, 20 @ 240V

•  Max power: 103W

DIMENSIONS / WEIGHT:

•  Dimensions (LxWxH): 10.1” x 6.3” x 10.2” / 257.5mm x 160.4mm x 258.0mm

•  Weight: 7.5 lbs. / 3.45 kg.

APPROVALS / RATINGS:

•  cETLus Pending

•  IP65

Specifications and manual are subject to improvement without prior written notice.

Summary of Contents for ENCORE LP7IP































Reviews:

No comments

Brands by name

Popular brands

Load more brands