ADJ Encore LP32IP User Manual Download

Page: 38 / 40

S P E C I F I C AT I O N S

Light Source:

• LED: 32 x 20W RGBL LED’s (50,000 hr.)

• Beam Angle: 11°, 25° with Frost Filter

• Field Angle: 23.7°, 47° with Frost Filter

• LUX: 157,491 @ 1M, 6,300 @ 5M (Full On); 28,363 @ 1M, 1,135 @ 5M (Full On) with Frost Filter

Features:

• IP65 rated – protects from dust, sand, moister, water

• All metal construction with black housing

• Includes heavy duty floor / mounting bracket with omega clamp receivers

• Sure-lock locking bracket system (securely locks every 10°)

• Includes magnetic removable filter frame to add a diffusion filter

• Flicker free for film and broadcast

• Linear variable white temperature control (2700K - 7000K)

• Built-in antenna for WiFLY EXR Wireless DMX

Construction:

• Display: OLED display with function buttons

• Data In/Out: IP65 Locking 5-pin XLR, DMX In/Out (with rubber protective covers over connections)

• Power In/Out: IP65 Locking Power In/Out (with rubber protective covers over connections)

• All Metal Heavy-Duty Housing: Built To Last In Outdoor or Touring Applications

Control:

• WiFLY EXR Wireless DMX built-in (2500 ft. / 700M line of sight)

• Multiple DMX channel modes

• 8 individually controlled sections with Pixel Zone Control

• 0-100% D smooth 16-bit Dimming

• 6 Dim Modes

• 4 Dim Curves

• User settable Dim Speed control

• Control Mode: DMX512, RDM (Remote Device Management)

• LED Refresh Rate: 900Hz - 25Khz

• With Wired Digital Communication Network

• Selectable Fan Modes: Silent, Auto or High

Electrical:

• Power voltage: AC100-240V, 47/63Hz (Multi-voltage)

• Daisy chain up to 2 fixtures max (@ 120V); 6 fixtures max (@ 240V)

• Power consumption: 334W Max

Dimensions & Weight:

• Dimensions: 13.9”x 9.7” x 6.5” / 353.4 x 246.0 x 165.5mm

• Weight: 24.25 lbs. / 11kg.

Approvals / Rating:

• CE Certified

Please Note: Specifications and improvements in the design of this unit and this manual are subject to change without

any prior written notice.

4010765

Summary of Contents for Encore LP32IP









































Search results

Summary of Contents for Encore LP32IP

Reviews:

Related manuals for Encore LP32IP

Brands by name

Popular brands

ADJ Encore LP32IP, User Manual

Search results

Summary of Contents for Encore LP32IP

Reviews:

Related manuals for Encore LP32IP

Brands by name

Popular brands