ADJ Encore LP32IP Page 2 User Manual Download

Page: 2 / 40

instructions herein are subject to change without notice. ADJ Products, LLC logo and identifying prod-

uct names and numbers herein are trademarks of ADJ Products, LLC. Copyright protection claimed

includes all forms and matters of copyrightable materials and information now allowed by statutory or

judicial law or hereinafter granted. Product names used in this document may be trademarks or regis-

tered trademarks of their respective companies and are hereby acknowledged. All non-ADJ Products,

LLC brands and product names are trademarks or registered trademarks of their respective compa-

nies.

ADJ Products, LLC and all affiliated companies hereby disclaim any and all liabilities for property,

equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic

loss associated with the use or reliance of any information contained within this document, and/or as

a result of the improper, unsafe, insufficient and negligent assembly, installation, rigging, and opera-

tion of this product.

Europe Energy Saving Notice

Energy Saving Matters (EuP 2009/125/EC)

Saving electric energy is a key to help protecting the enviroment. Please turn off all electrical products when

they are not in use. To avoid power consumption in idle mode, disconnect all electrical equipment from power

when not in use. Thank you!

Date

Document

Version

Software

Version

DMX Channels

Notes

06/24/2022

1.0

1.01

4 / 7 / 8 / 13 / 16 / 32 /

35 / 41 / 44 / 64 ch.

Initial Release

DOCUMENT VERSION

Due to additional product features and/or enhancements, an updated version of

this document may be available online.

Please check

www.adj.com

for the latest revision/update of this manual

before beginning installation and/or programming.

Summary of Contents for Encore LP32IP









































Search results

Summary of Contents for Encore LP32IP

Reviews:

Related manuals for Encore LP32IP

Brands by name

Popular brands

ADJ Encore LP32IP, User Manual

Search results

Summary of Contents for Encore LP32IP

Reviews:

Related manuals for Encore LP32IP

Brands by name

Popular brands