background image

ADJ Products, LLC  -  www.adj.com  - Dotz Panel 2.4 User Manual Page 3

Unpacking: Thank you for purchasing the Dotz Panel 2.4 by ADJ Products, LLC. Every Dotz Panel 2.4 

has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the 

shipping carton for damage that may have occurred during shipping. If the carton appears to be dam-

aged, carefully inspect your fixture for any damage and be sure all accessories necessary to operate 

the unit has arrived intact. In the case damage has been found or parts are missing, please contact our 

toll free customer support number for further instructions. Do not return this unit to your dealer without 

first contacting customer support. 

Introduction: The Dotz Panel 2.4 is part of ADJ’s continuing pursuit for creating high quality afford-

able intelligent fixtures. The Dotz Panel 2.4 is a high performance, DMX intelligent, LED fixture. This 

fixture is a great piece for retail stores, displays, mood, architectural, interior and exterior decoration, 

and clubs. This unit can be used as a stand alone unit, or in a Primary/Secondary configuration. The 

unit can also be controlled via DMX controller. This fixture is suitable for theaters, studios, retail stores, 

and other similar locations.

Customer Support: ADJ Products, LLC provides a toll free customer support line, to provide set up 

help and to answer any questions should you encounter problems during your set up or initial opera-

tion. You may also visit us on the web at www.adj.com for any comments or suggestions. Service 

Hours are Monday through Friday 8:00 a.m. to 4:30 p.m. Pacific Standard Time.

 

Voice: 

(323) 582-2650

 

Fax: 

(323) 582-2941

 

E-mail: [email protected]

To purchase parts online visit parts.adj.com.

Warning! To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or 

moisture. 

Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself, 

doing so will void your manufactures war-ranty. In the unlikely event your unit may require service 

please contact ADJ Products, LLC.

PLEASE recycle the shipping carton when ever possible.

Dotz Panel 2.4       

                                             Introduction

Summary of Contents for DOT524

























Reviews: