ADJ DOT524, User Manual

Page: 21 / 24

Dotz Panel 2.4 Fuse Replacement
Locate and remove the unit’s power cord. Once the cord has been removed, locate the fuse holder
inside the power socket. Insert a flat-head screw driver into the power socket and gently pry out the
fuse holder. Remove the bad fuse and replace with a new one. The fuse holder has a built-in socket
for a spare fuse. Be sure not to confuse the spare fuse with active fuse.
Dotz Panel 2.4 Cleaning
Due to fog residue, smoke, and dust, cleaning the internal and external optical lenses must be car-
ried out periodically to optimize light output. A soft cloth should be used to wipe down the outside
casing. Cleaning frequency depends on the environment in which the fixture operates (i.e. smoke,
fog residue, dust, dew).
Dotz Panel 2.4 Troubleshooting
Listed below are a few common problems the user may encounter, with solutions.
Unit not responding to DMX:
Check that the DMX cable are connected properly and are wired correctly (pin 3 is “hot”; on some
other DMX devices pin 2 may be ‘hot’). Also, check that all cables are connected to the right con-
nectors; it does matter which way the inputs and outputs are connected.
Unit does not respond to sound:
Quiet or high pitched sounds will not activate the unit.
If problems are not resolved, please contact ADJ Products, LLC for service.
ADJ Products, LLC - www.adj.com - Dotz Panel 2.4 User Manual Page 21