18
Blood FlowMeter
Owner’s Guide
Connecting the Blood FlowMeter
Before connecting anything make sure that the power outlet and the switch
on the rear panel of the Blood FlowMeter are turned off .
Connect the power supply output of the external supply to the power input of
the Blood FlowMeter. Make sure that this connector is pushed all the way in,
as it does not have a locking facility.
USB Connection (Digital)
When you have installed the soft ware, connect the Blood FlowMeter to your
PC or laptop using the USB cable supplied with the device.
Note: Windows may display a message to indicate that the device driver is
being installed when the Blood FlowMeter is turned on.
BNC Connection (Analog)
Connect the BNC outputs of the Blood FlowMeter to the signal inputs of
your recording device. Note that the Blood FlowMeter has outputs for both
LDF and BSC signals (see Signal Output Connectors, page 16). Both signal
outputs do not need to be used. You only need to connect the output signal
that you wish to record.
USB icons
Blood FlowMeter
Computer or
hub connection
USB cable
Figure 2–1
Connecting a Blood
FlowMeter to a computer
with USB
