background image

IMPORTANT

 

ASSEMBLY INFORMATION 

 
 

 

Tools Required for Assembling the Bench:  Two Adjustable Wrenches and Allen 
Wrenches.  

 

NOTE:  It is strongly recommended that this equipment is assembled by two or more 
people to avoid possible injury.

 

 Ensure 

Carriage Bolts

 are inserted through the 

SQUARE

 

holes

 on components that need to 

be assembled. Attach washer only to end of the Carriage Bolt. 

 Use 

Allen Bolts or Hex Bolts

 inserted through the 

ROUND hole

 on components that need to 

be assembled. 

 

Always wait until all bolts are assembled onto the bench before tightening the bolts. Do not 
tighten each bolt right after it is installed 

 

Fasten Nuts and Bolts 
 
 

 

Securely tighten all Nuts and Bolts after all 
components have been assembled in current and 
previous steps. 
NOTE: Do not over tighten any component with 
pivoting function. 
Make sure all pivoting components are able to move 
freely.

 

 

Do not tighten all Nuts and Bolts in this step. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

©IMPEX INC.                                                                                                                                         www.impex-fitness.com

 

6

Summary of Contents for ADI-10242-I












Reviews: