14
DETERGEN SOLUTION FLOW RATE ADJUSTMENT
1.
Turn the valve knob (1) to
adjust the detergent
solution flow rate.
2.
On the 3SD equipped models it will be necessary to press the
dedicated button to activate the detergent solution supplying
selecting between the tradition mode using the valve or the
optimal fixed supply system (see chapter “3S Solution Saving
System”).
AUTOMATIC MODE WORK
Automatic mode is hepful to simplify the operator work,
1.
Check that the machine is set in automatic mode, if not press
button (1) and the display will show the corresponding symbol
2.
Press the pedal placed on the footboard.
Once the pedal is pressed the machine runs forward, the brush base
goes down and simultaneously the squeegee goes down, then the
solenoid valve opens itself and brushes and suction motor start
working.
Before running the machine it is possible to set the brushes pressure
and the water and/or detergent solution flow rate (3S and 3SD
versions).
The values set will show immediately on the display.
After releasing the pedal: the brush base goes up, the brushes motors
stop, the solenoid valve closes itslef and the suction motor shuts off.
To lift the squeegee at the end of the work press the button (2).
SUCTION MOTOR SILENT MODE
It is possible to start the silent mode of the suction motor by pressing
for a few seconds the switch-on button (1) of the suction motor.
When the silent mode is on the symbol on the display changes.
STANDBY MODE
After 10 minutes of inactivity, if the machine is on, it goes in stand-
by mode and the display turns off. To start again press any button on
the instrument board, the display will turn on again and after few
seconds the machine returns operative.
HORN
The machine is provided with a
horn that can be activated
pressing button (1).
EMERGENCY BUTTON
In case of emergency press
buttonIn (1) placed on the
dashboard. All the fucntions and
the movement will be
immediately disabled.
To reactivate them turn the
button clockwise..
PARKING BRAKE
The machine is equipped with a parking brake on the traction wheel
which disable itself when traction is activated.
On the display it will be shown when the brake is on.
MANUAL MOVEMENT OF THE MACHINE
To move the machine manually, it is necessary to unblock the parking
brake that blocks the traction motor wheel. To do this, keep the lever
(3) lifted. With the delivery of the machine we also supply a cord that
allows the lever operation (3).
After having moved the machine, take off the cord and keep it for
eventual re-use.
When the parking brake is released manually, for example when the
machine has to be moved without batteries, avoid covering slopes
and do not park on them either.
BRUSHES MOTOR OVERLOAD PROTECTION SYSTEM
The machine is equipped with a protection device of the brushes
motor. This device blocks the motor functioning in order to protect it
and indicates the overload on the display with the message
"ALLARME 1".
When this happens, try to reduce the brushes pressure (see under
"ADJUSTMENT OF THE BRUSHES PRESSURE").
If the problem persists, contact the authorized technical assistance..
OVERFLOW SYSTEM
In order to avoid serious damages to the suction motor, the machine
is equipped with a float that intervenes when the recovery tank is
full. When this happens, it is necessary to empty the recovery tank.
Hold the exhaust hose of the machine. Take off the plug and empty
the recovery tank into appropriate containers, according to the
standard norms.
