For Cyanoacrylates and Solvents
For Thick Fluids
2/3 maximum
fill
Caution:
Do not completely fill barrels. The optimum fill is a maximum 2/3 of the barrel capacity
If the fluid you are dispensing is pourable, take the barrel, twist on a tip cap and pour your fluid in. If
appropriate, insert the PE piston (see page 13). Carefully press the piston down until it contacts the flu-
id. The barrel is now ready for use.
If you are dispensing solvents, cyanoacrylates or anaerobics, use the Easy-Flow piston.
If your fluid is thick or non-levelling, you can spoon it into the barrel with a spatula Or, if the fluid comes
packed in a 1/10 gallon cartridge, try loading the barrel with a caulking gun. Then press in the PE piston
to move the fluid to the bottom of the barrel and to remove trapped air.
Easy-Flow
Fill procedure for cyanoacrylates
or watery-thin fluids
Fill procedure for thick fluids
(shown: caulk gun)
1/2 maximum fill
Fill procedure for
pourable fluids
2/3 maximum
fill
1/2 maximum fill
