ADF Web HD67941-B2, User Manual

Page: 19 / 40

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual DALI / MQTT
Document code: MN67941_ENG Revision 1.000 Page 19 of 40
Figure 3e: “Set Communication  Wi-Fi” window
W
I
-F
I
:
This section is used to define the general parameters of Wi-Fi. It is possible to
defined the type of Wi-Fi communication:
Access Point;
Client.
The means of the fields for Access Point configuration are:
In the field “ IP Address ” the IP address of the converter is defined;
In the field “ Subnet Mask ” the SubNet Mask of the converter is defined;
In the field “ GATEWAY ” the default gateway of the net is defined. This
feature can be enabled or disabled pressing the Check Box field. This feature
is used for going out of the net;
In the field “ DNS ” the DNS address is defined. This field is required if the
server address is define by URL and not IP Address.
In the field “ Port ” the port used for MQTT communication is defined;
In the field “ SSID ” the name of the Wi-Fi network to create is defined;
In the field “ Password ” the password used for Wi-Fi connection is defined;
In the field “ Type ” the type of security protocol used by the Wi-Fi network is
defined;
If the field “ Enable DHCP ” is checked, the converter acts as DHCP Server
for the Clients connected. If the option is enabled, in the fields “ DHCP First
IP Address ” and “ DHCP SUBNET Mask ” the IP Addresses range used for
DHCP is defined. In the field “ Lease Time (seconds) ” the required time for the renewing of the IP Address assigned to the Client is
defined;
In the field “ Max Client ” the maximum number of Wi-Fi Clients accepted is defined;
In the field “ Channel ” the channel for Wi-Fi communication is defined.