ADF Web HD67941-B2, User Manual

Page: 34 / 40

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual DALI / MQTT
Document code: MN67941_ENG Revision 1.000 Page 34 of 40
A
LL DEVICES
(B
ROADCAST
):
The means of the fields for the “CONTROL COMMANDS”
section are:
In the “ POWER CONTROL ” bar it is possible to
change the actual ADV of the entire DALI network;
In the field “ COMMAND ” it is possible to select a
DALI command to send to the entire DALI
network. For set commands, it is possible to insert
the value to set in the field “
xx ”. As soon as the
command to send is selected, the command is
sent: in order to send the same command more
times, it is possible to press the “
SEND
COMMAND ” button;
In the field “
COMMAND FEEDBACK
” the response
from the DALI network is printed.
Note:
This section is used to test the functioning of the
DALI network.
In the “SET SCENES” section it is possible to activate the
programmed scenes into all the DALI devices that have
them:
By pressing the buttons “
GO TO: SCENE X
” it is
possible to activate the correspondent scene in the
DALI network. Only the devices that have it will
accept the command.
Figure 14: “Broadcast settings” window