Industrial
Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO:
www.adfweb.com
Phone +39.0438.30.91.31
User Manual
DALI / Ethernet
Document code: MN67839_ENG Revision 1.001 Pagina 38 di 62
DALI
SCI3:
This set of simple HEX commands allows to send DALI commands for controlling and reading DALI devices and to program the network.
Dali network scanning
This command is used to get the informations from the DALI nodes configured in the network.
Note:
This command must be sent to the UDP port 10000.
REQUEST
Byte 0
Byte 1
Byte 2
Byte 3
Byte 4
Byte 5
Byte 6
Byte 7
Byte 8
Byte9
Hex
0x44
0x41
0x4C
0x49
0x5F
0x49
0x4E
0x46
0x4F
0x3D
Text
D
A
L
I
_
I
N
F
0
=
RESPONSE
The converter sends back as response an array of data of 512 bytes. For each DALI node, 8 bytes are reserved. Here’s the data mapping of
the data array sent:
