Industrial
Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO:
www.adfweb.com
Phone +39.0438.30.91.31
User Manual
PROFINET Slave / Ethernet - Converter
Document code: MN67659_ENG Revision 1.000 Page 10 of 26
ETHERNET:
The Ethernet connection must be made using Connector3 or Connector4 of HD67659-A1 with at least a Category 5E cable. The maximum
length of the cable should not exceed 100m. The cable has to conform to the T568 norms relative to connections in cat.5 up to 100 Mbps. To
connect the device to an Hub/Switch is recommended the use of a straight cable, to connect the device to a PC/PLC/other is recommended
the use of a cross cable.
Connector4:
Ethernet2 port
(RJ45 Plug)
Connector3:
Ethernet1 port
(RJ45 Plug)
