Industrial
Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO:
www.adfweb.com
Phone +39.0438.30.91.31
User Manual
Ethernet/IP / DeviceNet Slave - Converter
Document code: MN67598_ENG Revision 1.000 Pagina 9 di 19
ETHERNET/IP:
The Ethernet/IP connection must be made using Connector3 and/or Connector4 of HD67595-A1 with at least a Category 5E cable. The
maximum length of the cable should not exceed 100m. The cable has to conform to the T568 norms relative to connections in cat.5 up to
100 Mbps. To connect the device to an Hub/Switch is recommended the use of a straight cable, to connect the device to a PC/PLC/other is
recommended the use of a cross cable.
USB:
The USB connection, must be made with a USB cable with a USB Mini B plug.
The USB port is used for programming the device.
