Industrial
Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO:
www.adfweb.com
Phone +39.0438.30.91.31
User Manual
Ethernet/IP / DeviceNet Slave - Converter
Document code: MN67598_ENG Revision 1.000 Pagina 11 di 19
USE OF COMPOSITOR SW67598:
To configure the Converter, use the available software that runs with
Windows, called SW67598. It is downloadable on the site
www.adfweb.com and its operation is described in this document.
(This
manual is referenced to the last version of the software present on our
web site)
. The software works with MSWindows (MS 2000, XP, Vista,
Seven, 8; 32/64bit).
When launching the SW67595 the right window appears (Fig. 2).
NEW PROJECT / OPEN PROJECT:
The “
New Project
” button creates the folder which contains the entire device configuration.
A device configuration can also be imported or exported:
To clone the configurations of a Programmable “Ethernet/IP / DeviceNet Slave – Converter”
in order to configure another device in the same manner, it is necessary to maintain the
folder and all its contents;
To clone a project in order to obtain a different version of the project, it is sufficient to
duplicate the project folder with another name and open the new folder with the button
“
Open Project
”.
Figure 2: Main window for SW67598
