Industrial
Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO:
www.adfweb.com
Phone +39.0438.30.91.31
User Manual
EtherNet/IP / DeviceNet Master - Converter
Document code: MN67597_ENG Revision 1.011 Pagina 12 di 25
USE OF COMPOSITOR SW67597:
To configure the Converter, use the available software that runs with
Windows, called SW67597. It is downloadable on the site
www.adfweb.com and its operation is described in this document.
(This manual is referenced to the last version of the software present
on our web site)
. The software works with MSWindows (MS 2000, XP,
Vista, Seven, 8; 32/64bit).
When launching the SW67595 the right window appears (Fig. 2).
NEW PROJECT / OPEN PROJECT:
The “
New Project
” button creates the folder which contains the entire device configuration.
A device configuration can also be imported or exported:
To clone the configurations of a programmable “EtherNet/IP / DeviceNet Master –
Converter” in order to configure another device in the same manner, it is necessary to
maintain the folder and all its contents;
To clone a project in order to obtain a different version of the project, it is sufficient to
duplicate the project folder with another name and open the new folder with the button
“
Open Project
”.
Figure 2: Main window for SW67597