Industrial
Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO:
www.adfweb.com
Phone +39.0438.30.91.31
User Manual
CAN from/to Modbus Slave
Document code: MN67412_ENG Revision 1.000 Page 9 of 25
NEW PROJECT / OPEN PROJECT:
The “
New Project
” button creates the folder which contains the entire device configuration.
A device configuration can also be imported and exported:
To clone the configurations of a Programmable “CAN from/to Modbus Slave” Gateway in order to configure another device in the same
manner, it is necessary to maintain the folder and all its contents;
To clone a project in order to obtain a different version of the project, it is sufficient to duplicate the project folder with another name
and open the new folder with the button “
Open Project
”.
When a new project is created or an existent project is open, it will be possible to access the various configuration sections of the software:
“Set Communication”;
“Receive COB”;
“Transmit COB”.
