Industrial
Electronic Devices
ADFweb.com S.r.l.
User Manual
CANopen / Ethernet
Document code: MN67503_ENG Revision 2.100 Page 25 of 33
Figure 7: “Protection” window
Warning:
If Fig. 67 appears when you try to do the Update try these points before seeking assistance:
Check if the serial COM port selected is the correct one;
Check if the serial cable is connected between the PC and the device;
Try to repeat the operations for the updating;
If you are using a USB
RS232 converter try with a native COM port or
change the converter;
Try to repeat the operations for the updating;
Try with another PC;
Try to restart the PC;
Check the LAN settings;
If you are using the program inside a Virtual Machine, try to use in the main
Operating System;
If you are using Windows Seven, Vista and 8 make sure that you have the administrator
privileges;
In case you have to program more than one device, using the "UDP Update", you have to cancel the ARP table every time you
connect a new device on Ethernet. For do this you have to launch the "Command Prompt" and write the command "arp -d". Pay
attention that with Windows Vista, Seven, 8 you have to launch the "Command Prompt" with Administrator Rights;
Take attention at Firewall lock.
Warning:
In the case of HD67503-A1 or HD67503-B2 you have to use the software “SW67503”:
www.adfweb.com\download\filefold\SW67503.zip
.
Note:
The minimum version of the configuration software must be the 2.000.
