Adexa SM-2088G Instruction Manual Download Page 5

●  Please note that when passing the device on to a third party, the operating 

    instructions must be included.

●  No liability is accepted for damage due to improper use or the failure to observe 

    our operating instructions / safety notes.

●  Unplug the appliance when not in use or before cleaning.
●  If the supply cord is damaged, it must be replaced by the manufacturer or its 
    service agent or a similarly qualified person in order to avoid a hazard.
●  The blades are very sharp. Be careful while clean the jar.
●  Switch off the appliance and disconnect from supply before changing 

    accessories or approaching parts that move in use.

●  This appliance is not intended for use by persons (including children) with 

    reduced physical, sensory or mental capabilities, or lack of experience and 
    knowledge, unless they have been given supervision or instruction concerning 
    use of the appliance by a person responsible for their safety.

●  Children should be supervised to ensure that they do not play with the appliance.
●  Do not use mixing, mincing and blending function at the same time. Only use 

    one of them at a time.

1. Press the rise button, then lift the machine arm.
2. Put the mixing bowl onto the base, and lock it as the arrowhead denotes.

3. Fix the dusty cover onto the mixing blade, then lock the blade into the machine.

Technical information

Voltage

   220-240V~

frequency:  50/60Hz
Power:       1500W

Agitator kettle capacity:10liters

●  All parts of the stand mixer are to be thoroughly cleaned before being used for 

    the first time. (See section: Cleaning).

●  Take out the required length of cable from the cable tidy on the base of the 

    blender and connect the device to the mains supply.

Technical information

Before first use

4

Summary of Contents for SM-2088G









Reviews: