9.
Warning!
Do not damage the refrigerant circuit.
10.
During transportation and installation of the appliance, assure
that none of the components of the refrigerant circuit becomes
damaged.
11.
This appliance is heavy. Care should be taken when moving it.
12.
Never tilt the appliance more than 45° or turn the appliance on
its side or upside down to avoid damaging the refrigerant
circuit.
13.
Warning!
Do not use other electrical appliances (such as ice
cream makers) inside the food storage compartments of the
appliance.
14.
Do not store explosive substances such as aerosol cans with a
flammable propellant in this appliance.
15.
Warning!
The light bulb supplied with this appliance is a special
type lamp. To replace the lamp, please contact a qualified
technician.
16.
Do not use excessive force to open the glass door and do not
apply pressure to the glass to prevent it from breaking.
17.
Warning!
Disconnect the appliance from its power source
during cleaning or maintenance and when replacing parts. The
removal of the plug has to be such that an operator can check
from any of the points to which he has access that the plug
remains removed. If this is not possible, due to the
construction of the appliance or its installation, a disconnection
with a locking system in the isolated position shall be provided.
18.
After turning the appliance off, always wait at least 5 minutes
before turning it on again. Otherwise, the compressor may be
damaged.
INSTALLATION
This appliance is intended to operate in climates where the maximum temperature and
the humidity are 25°C and 60% respectively.
The operation and storage room must be well ventilated.
The appliance should be installed well away from heat sources such as
radiators, boilers, direct sunlight, etc.
Make sure air can circulate freely at the back of the appliance.
•
Place the appliance on a wide, even, stable and dry surface able to support the