combined weight of the appliance and its contents.
•
Allow at least 15 cm free space at the back of the appliance and its two sides.
•
Install the appliance in an area where the door can open completely.
•
Accurate horizontal leveling is ensured by two adjustable feet at the base of the
cabinet. If the unit is not installed horizontally, the door does not close properly
and the cooling department is not sealed.
•
The door gasket must seal adequately when the door is closed. If not rearrange
ii appropriately.
Reversing door side
The default left side orientation of the door can be changed to the right side. Proceed as
follows:
1.
Turn the temperature knob to position 0 and disconnect the power plug from the
wall outlet.
2.
Tilt the appliance backwards (max. 45°) and securely support it.
3.
Remove the bigger adjustable foot from the base.
4.
Loosen the screws on the base of the appliance and remove the bottom hinge.
5.
Place the bottom hinge on the opposite side and retighten it with screws.
6.
Reinstall the bigger adjustable foot on the opposite side.
7.
Bring the appliance back to an upright position.
8.
Remove the door hinge cap at the top of the appliance.
9.
Loosen the screws and remove the upper hinge.
10.
Place the upper hinge on the opposite side and retighten it with screws. Reinstall
the hinge cap.
11.
Make sure that the door is in the vertical position and can be closed easily.
Note:
After reversing the door, the door gasket may get loose. If you notice a gap
between the gasket and cabinet, gently pull the gasket out to seal the gap.
Electrical connection
Before using the appliance for the first time, wash the interior and all internal
accessories, then dry thoroughly (CLEANING).
Connect the appliance to a socket with earth terminal according to technical data of
the appliance.
•
It is advisable to wait at least 8 hours after transportation before connecting the
appliance, to allow the oil to flow back in the compressor.
•
Do not connect the appliance to a multi-socket or to an extension cord. The
power plug of the appliance should have its own independent and properly
grounded socket. Using adapters may cause overheating or fire.
•
If the power plug socket is loose, do not insert the power plug. There is a risk of
electric shock or fire.
•
Make sure that the power plug is accessible after the installation of the
