background image

EN

LoRaWAN US915 PULSE - User guide version V1.0.0

8

Page

of 26

FR

ENVIRONMENTAL RECOMMENDATIONS

All superfl uous packaging materials have been eliminated. We have done everything possible to make it easy to 

separate the packaging into three types of materials: cardboard (box), expanded polystyrene (fi ller material) 

and polyethylene (packets, foam protective sheets). Your device is composed of materials that can be recycled 

and reused if it is dismantled by a specialist company. Please observe local regulations concerning the manner in 

which waste packaging material, used batteries and your obsolete equipment are disposed of. 

WARNINGS

Valid for products indicated in the declaration of conformity

 

Read the instructions in the manual.

 

The safety of this product is only guaranteed when it is used in accordance with its purpose. Maintenance 

should only be carried out by qualifi ed persons.

 

Risk of explosion if the battery is removed with an incorrect type. Contact Adeunis for more information if 

needed.
  

  Risk of explosion if the battery is replaced by an incorrect type

Please note: 

Do not install the equipment close to a heat source or in damp conditions.

Please note:

 When the equipment is open, do not carry out any operations other than the ones set out in this 

document.

 

 

Please note: Do not open the product as there is a risk of electrical shock.

 

Please note: For your own safety, you must ensure that the equipment is switched off  before carrying out 

any work on it.

 

Please note: For your own safety, the power supply circuit must be SELV (Safety Extra Low Voltage) and 

must be from limited power sources.

 

 Please note: When the aerial is installed outside, it is essential to connect the cable screen to the buil-

ding’s earth. We recommend using lightning protection. The protection kit chosen must permit the coaxial cable 

to be earthed (eg: coaxial lightning arrester with earthing of the cable at diff erent places on the aerial at the base 

of pylons and at the entrance, or just before entering the premises).

The product must be equipped with a switching mechanism so that the power can be cut. This must be close to 

the equipment. Any electrical connection of the product must be equipped with a protection device against vol-

tage spikes and short-circuits.

Please note: the equipment is not intended for the use by a child.

Summary of Contents for ARF8230B



























Reviews: