FR
EN
FIELD TEST DEVICE - LoRaWAN AU 915-928 - Mode d'emploi V1.0.0
36
Page
of 54
1.3. Technical specifications
Radio
Communication
LoRaWAN protocol & LoRa Modulation
Network area
AU915-928
Output power
+20dBm max (all MAC commands requesting a power adjustment greater than 20dBm will be
readjusted to 20dBm)
Supply
Connector
Micro-USB - 5V - 500mA
Battery
Lithium-Ion Polymer 3.7V 2Ah 7.4Wh
Opérational
Device configuration
Via AT commands
(see relevant chapter to find a full list of available AT commands)
Serial rate
115.2 kbps
Parity
None
Amount of data
8
Stop bit
1
Functioning temperature
-30°C / +70°C
Network settings
Applicative port (Downlink)
1
1.4. Charging the FTD
The device is equipped with a rechargeable battery. Once the device has been connected to a USB charger or the USB socket of a computer, it
will start to charge automatically; even if the ON/OFF communicator is set to OFF (this functions in exactly the same way as a mobile phone).
The device can be used while it is charging. During charging, the charge indicator will be red. When the device is fully charged, the indicator will
turn green.
If the battery is completely empty, it will be necessary to recharge the device for 6 hours in order for it to be fully charged.
Figure 1 : Device charging
Figure 2 : Device is fully charged
