22
ENGLISH
SETTING THE ALARM
The ALARM function allows the user to set the
recording duration, speed to be recorded and tape
recycle for alarm recordings. When a contact clos-
ure occurs at the ALARM IN input, the VCR auto-
matically enters the RECORD mode at the pre-pro-
grammed ALARM recording speed. (See Alarm In,
page 11 for a complete description of the ALARM
sequence.) The ALARM recording duration can
last according to the set value, or until the contact
closure is reopened.
The ALARM recording speed can be pre-pro-
grammed to 02~960 in the NORMAL mode or to
✽
06~
✽
960 in the HD mode.
The checking signal is automatically recorded on
the tape at the beginning of each ALARM record-
ing. Later, you can easily locate the start of each
recording by using these signals when watching a
recorded content. See “ALARM INDEX SEARCH”
on page 26 for details.
The TIME/DATE display is set as follows during
ALARM display.
— ALARM stars (
✽
) will replace the colons (:).
— The recording speed will be changed to 02~960
(or
✽
06~
✽
960) in the NORMAL (or HD) mode
which was selected from the “SPEED” setting in
the ALARM display.
Notes:
• When the ALARM recording ends, the unit will
return to the original record speed and restore
the original record speed values to the
TIME/DATE displays.
• Select 02 (or
✽
06) from the “SPEED” setting in
the NORMAL (or HD) mode when the alarm
input is within 30 seconds. If the 12~960
(
✽
18~
✽
960) speed is selected, electronic
“marks” are not recorded on the tape and alarm
index search will not operate.
1. Press the START/STOP button. The duration
setting flashes on/off.
2. Press the UP or DOWN button until the desired
setting appears on the monitor. (MANUAL, 5,
15, 30 SEC, 1, 3, 5, 10, 30, 60 MIN, TAPE END)
3. Press the SET button. The record speed setting
flashes on/off.
4. Press the UP or DOWN button until the desired
setting appears on the monitor.
(NORMAL MODE: 02~960h
HD MODE:
✽
06~
✽
960h)
5. Press the SET button. The alarm ready setting
flashes on/off.
6. Press the UP or DOWN button to select the
alarm ready function. (YES or NO)
Select “YES” if you want to start alarm record-
ing even in the normal record or stop mode.
Select “NO” if you do not want alarm recording
in the stop mode.
7. Press the SET button. The alarm out setting
flashes on/off.
8. Press the UP or DOWN button to select the
alarm out function. See “ALARM OUT” on
page 11 for details. (DURATION or PULSE)
9. Press the SET button.
The RECYCLE position flashes on/off.
10. Press the UP or DOWN button to select the
mode at the end of tape. See “TAPE RECYCLE”
on page 24 for details.
11. Press the START/STOP button.
Programming for the ALARM has been com-
pleted.
DU
L
R
ARM
:
T I ON
U
M
AL
AN
S
SPE D :
02
A
LARM
A
LARM
A
LARM
A
A
RE
S
I ND ,
W
DU
FU
R T I ON
I ON
A
E
Y
D
R
:
A
E
:
O T
U
YE
SET
TOP
NC
I F
T
CL
ECY
R
E
S
ALARM Display Format Description
DURATION: User programmable length or time the unit
stays in the alarm record mode. (MANUAL, 5 SEC, 15
SEC, 30 SEC, 1 MIN, 3 MIN, 5 MIN, 10 MIN, 30 MIN,
60MIN or TAPE END.)
ALARM RECORDING TAPE SPEED
NORMAL MODE: 02~960
HD MODE:
✽
06~
✽
960
ALARM READY (YES or NO)
RECYCLE FUNCTIONS
(“REWIND, STOP IF ALARM”, “REWIND, STOP” or
“REW, RE-REC”)
ALARM OUT
(DURATION or PULSE)
AVR960SV-A4.E 01.6.12 6:08 PM ページ 22
