Ademco 4111XM Quick Guide
https://alpha.adt.com/help/31.html[11/8/2018 11:47:10 PM]
For more information on this topic please visit the complete
.
Battery
The Ademco 4111XM operates on a
.
Loss of AC power and use of backup battery power is indicated by
NO AC
.
A low battery condition is indicated by BAT.
For instructions on replacing your battery, please go to the
for this battery.
Bypass Protected Areas
Bypassing a zone allows you to arm your system with certain protected areas intentionally unarmed or to
access a protected area when the system is armed.
To
bypass
a zone, enter your [security code] + [BYPASS] + [2 digit zone number].
To
unbypass a zone
, disarm the system.
For more information on this topic please visit the complete
.
Chimes and Beeps
Your system communicates events using chimes and beeps.
The panel chimes twice when a protected door/window is opened.
To silence or enable chimes, scroll until the panel displays [Chimes], then press [OK].
Scroll to toggle [ON] or [OFF], then press [OK].
Press [Status] to exit.
A solid bell feature will appear in the display when Chime is enabled.
To turn chime mode on and off
, enter your [security code] + [CHIME].
When your system is in chime mode, a chime alert will sound three tones whenever a protected
door/window is opened.
For more information on this topic please visit the complete
.
Reset
To clear the display after an alarm event, enter your [security code] + [OFF] sequence twice to clear the
alarm event history.
