ADEL Instrumentation – 28 Rue de Stalingrad – 38300 BOURGOIN JALLIEU 1 – 04 74 93 06 37
Volt/mA Calibrator
Using
3.2.4 OUTPUT Millivolt dc
（
SOURCE mV
）
1
）
Press to step to SOURCE mV mode.
The display shows “SOURCE” with unit “mV”.
2
）
The test leads connected as shown in the right
figure, the general connection is that red is
positive and black is negative,the red test wire
connected to " mV/V " and the black test wire
connected to "COM" socket.
3
）
If the current over 100mV, the display will show
“-OL-”.
4
）
Press in and rotary the knob to step up/down in
different increments.
5
）
Press key , stepping up/down 25% of full
scale for output value.
6
）
Press key to select auto ramp output type.
7
）
Press key to select “SpanCheck” function.
15
