02/25/00
Microsense II Model 5300 Gaging System - 13
The Analog Display
The analog display allows you to view the output of each gaging channel. The analog meter is most useful
for setting the probe-to-target distance. For example, to adjust the channel A probe in its fixture, set the
Display Module Selector Switch to "A" and carefully adjust the position of the probe. As the probe is pulled
away from its target, the meter will swing toward the "Far" position. As the probe is pushed toward its target,
the meter will swing toward the "Near" position. When the meter is centered, the probe is also centered in
its range, allowing symmetrical deviation of the target from its current position.
Analog Meter
Display Module Selector Switch
Microsense II
Microsense II
5300
Analog Display Module
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
