7
M403660-211129-Rev006-UM-e
HOLD function
The Hold function is being used if you like to hold the results at the display after the weight/load has
been removed from the scale.
-
Press
HOLD
key while scale is under load.
-
“HOLD” is being displayed at the screen.
-
The weight remains saved in the display after unloading the scale.
-
For deactivation of the Hold function press again the
HOLD
key.
BMI (Body Mass Index)
The Body Mass Index is the ratio between height and weight squared. The BMI is accepted world wide
– also by WHO (World Health Organization) - helping to evaluate the state of nutrition and with that
value also the state of health of a person. The result is a tolerance value.
-
Start the scale by entering the ON/OFF button. The scale is automatically being set to zero.
-
Help the patient into the chair.
-
Take care that the feet are being rested on the footrest.
-
Wait until the weight is being displayed in a stable condition and
´ appears on the screen.
-
Press the
BMI
key shortly.
-
The scale starts automatically with the last input. Use the arrow buttons to enter the height of
the patient.
Confirm the height with the enter button
.
-
The BMI is now being displayed .
-
To correct the given height figures press the BMI button once again and the display returns to
the height mode.
-
To get back into normal weighing mode and leave the BMI modus simply step off the platform.
Evaluation of the Body Mass Index
Compare the determined value which corresponds to those being used by the WHO.
BMI below 18,5
The patient is under the regular standard and does not got enough weight. An increase of
weight is recommended. Please consult a professional.
BMI between 18,5 and 24,9
The patient got a normal weight. If he feels well there is no need for a change.
BMI between 25 and 30
The patient is slightly overweighed to pre-obese. A reduction of weight is indicated or, is
necessary if the state of health is already affected (e.g. diabetes, high end blood pressure,
heart diseases).
BMI over 30
Reduction of weight is imperative. To visit a doctor is highly recommended.
Connecting additional devices
Connection of printer, PC or remote-display will be done with the RS-232 interface. For connection of
additional devices kindly ask your local representative or authorized ADE dealer for further instructions.
