ADE M40010, Operating Manual

Page: 5 / 12

050100-Rev000-M40010 4
Quality check
ADE products correspond to the applicable EC Directives and European standards to manufacture
and distribute world-wide weighing and measuring equipment as per the latest technical standard
offering a long lifetime and continuous reliability.
This symbol stands for fulfillment of the European Directive 93/42 EEC for
medical devices and declares the conformity as per this Directive.
Due to the certification as per ISO 9001/2000 the high standards for Research
& Development, Manufacturing, Sales and Service requirements are fulfilled.
A copy of our ISO Certificate is available on request.
Approved scales class III respecting the standards of the Directive 90/384
EEC for non automatic scales are carrying this symbol.
Scales carrying this symbol in combination with class III sign are calibrated in
accordance with the high precision standards laid down in EC Directive
90/384 EEC.
Products carrying this symbol meet the requirements of:
•
Directive for non automatic scales for medical use 90/384 EEC
•
Applicable EC Directive governing the electromagnetic compatibility
(89/336 EEC).
•
Directive 73/23 EEC for low voltage regulations
EC type approval
The scale has been EC type approved under Nr.
NMI T6309 revision 0
Use of the scale
Weighing
Press
ON key for min. 3 seconds to power the scale. After start up an automatic function test is done
which ends in switching into `0.00´ position in kg weighing mode. The scale is now ready to weigh. In
case of any irregularities in weighing procedure the display will show the error indication Err xxx.
In this case go to chapter Cleaning, Maintenance and Re-approval, see point Service.
After `0.00´ is displayed properly the scale can be loaded. Make sure the patient is sitting still.
The correct weight can be read on the display.