ADE Captiv8-20, Operating Instructions Manual, Page: 3 / 28

Setting the
system
Before fully setting the system
First, check that the premises are physically secure,
check to ensure all windows are shut, and all external
doors locked. When the premises are completely
vacated you should fully set the system.
"
If your system is configured for
police response then it is recommended
that you use the proximity tag to set the
system.
Prevention of setting
A fault condition such as mains failure or fuse failure
will cause the Alert indicator to flash. A fault Alert must
be acknowledged before the system can be set. When
all the faults have been acknowledged the Alert
indicator will change to steady On indication.
To acknowledge fault Alert:
Key in your user code
to display the first
fault. Acknowledge the fault by pressing
button. Repeat the procedure to acknowledge other
faults. The system can now be set.
Full Set using a User code or tag
Key in a normal user code at the keypad
nearest the final exit door. Alternatively present a user
proximity tag to a keypad having a proximity tag
reader.
If Part Set programs B or C are enabled then the
display will ask you to select how you would like your
system set.
Press the key to select Program A to fully
set the system. If no attempt is made to press the A
key the system will automatically select Full Set
Program A.
The exit period will start and the inside sounder will
produce the exit sound - a pip-pip-pip sound.
You must now vacate the premises by the exit route
described in the System information. The length of
time that you have to vacate the premises depends on
the exit mode that has been programmed. Check your
System Information to find out the exit mode of
program A.
3
Captiv8-20
?
? ? ?
System Set
Select A B or C
A
** SYSTEM SET**
? ? ? ?
ENTER