ADE Captiv8-20, Operating Instructions Manual, Page: 15 / 28

Manager's menu 5 - Omit 24 hour zones
This menu allows the manager to omit 24 hour zones. A 24H zone is armed all of the time, whether the system
is set or not. Violating that zone will always cause an alarm. The manager can omit a 24 hour zone if it has
been programmed as omittable by the engineer. A zone which has been omitted cannot cause an alarm. Check
your System Information to see if any 24 hour zones are omittable.
Any 24 hour zones which have been omitted by the manager will automatically be re-instated when the system
is set. It is not possible to omit 24 hour zones when setting the system. The system will not set if a 24 hour
zone is faulty, the fault must first be rectified.
For example the garage can be a 24 hour zone which can be omitted during unset period. Which allow access
into the garage while the system is unset.
15
Captiv8-20
Zone n
Not Omitted
ENTER
A
B
Scroll to select zone
Toggle selection
YES/NO
If zones are omittable:
OMIT
1) Set System?
Ent to Set
2) View
Event Log?
3) Set Up
Codes & Tags?
4) Edit
Chime Zone?
5) Omit
24hour zones?
6) Set
Time & Date?
7) Walk Test?
8) Test
Outputs
A
B
A
B
A
A
B
A
B
B
A
B
A
B
A
B
ENTER
If there are no omittable
zones then the display
will indicate
'No omittable Zones'.
RESET
n n n
n
Type in the manager code to enter the manager’s menus:
RESET
To exit and return to
previous menu level.