ADE Captiv8-20, Operating Instructions Manual, Page: 20 / 28

INTRUDER
Logged when a Security or 24 Hour zone is activated. Includes the
zone number.
LOCAL LG OFF
Logged when the local PC connection has ended.
LOCAL LOG ON
Logged when the local PC successfully connects to the panel.
MAINS FAILED
Logged when there is a mains supply failure to the panel.
MAINS OK
Logged after a previous MAINS FAILED when the mains power
has been restored.
NEW TIME/DATE
Logged when either the time or date is changed, it records the
time and date after the change.
NVM INIT
Logged when the engineer forces the NVM to be re-initialised.
OLD TIME/DATE
Logged when either the time or date is changed, it records the
time and date before the change. This event is always followed by
NEW TIME/DATE.
PA
Logged when either a Silent or Audible PA or PA zone is
activated. Includes the zone number.
PC LOG OFF
Logged when the remote PC Logs off from the system.
PC LOG ON
Logged when the remote PC logs on (connects) to the system.
PC PRG ABORT
Logged when the remote PC aborts the download.
PC PRG START
Logged when the remote PC starts a download of the
programming data.
PC PROG DONE
Logged when the remote PC successfully downloads a new
system setup.
PC RESET
Logged when the system is reset by the remote PC.
POWER UP
Logged after a system power up.
PROX TAG
Logged when a tag is used, USER n.
PUSH TO SET
Logged when a Push to Set zone is used to compete setting
procedure.
RKP FAILED
Logged when an RKP fails to respond to the control panel.
RKP OK
Logged when failed RKP comes back on line.
RKP PA
Logged when RKP x PA buttons are operated.
RKP TAMPER
Logged when RKP case tamper has closed.
RKP TAMPER
Logged when the tamper switch in the RKP is opened. Includes
the RKP number.
RKP TAMPER OK
Logged when RKP case tamper has opened.
SET BY
This event is logged when the system is set. It identifies the user
who set the system.
20
Operating instructions