AddSecure Edge VS5010, User Manual

Page: 13 / 14

PDK-13010-v.6.0 Edge VS5010 and VS5051 User manual page 13
secondary circuit which is so designed and protected that under normal and
single fault conditions, the voltage between any two accessible parts does
not exceed a safe value (42.4V AC peak or 60V DC maximum).
The terminal's interfaces has the following safety classifications:

Dial capture interface: SELV suitable for connections to the TNV
interface of single line telecommunications equipment such as
telephones, alarm panels, etc.

Power Interface: SELV for connection to DC Supply

Inputs: SELV for connection to alarm output pin.
14 Conformance
The terminal complies with the following European Directives and
standards:

2014/53/EU (Radio Equipment Directive)

2002/96/EC (WEEE)

2011/65/EC (ROHS)

No. 1907/2006 (REACH)

EN81-28*

EN81-20*

EN81-70*
*Only relevant sections that apply to this terminal.
15 Contact
General:
www.addsecure.com
15.1 Installation and Service Support
Telephone: +47 911 33 700
Telephone:
+46 20 322 000
Email:
service.support.se@addsecure.no
Email:
service.support.se@addsecure.se
http://www.addsecure.com
15.2 Sales enquiries
Telephone: +47 911 33 700
Telephone:
+46 8 685 15 10
Email:
sales.support.no@addsecure.se
Email:
sales.support.se@addsecure.se
16 Disclaimer
The information contained in this document is supplied without liability for any
errors or omissions.
Norway Sweden
Norway Sweden