AP-VP280 BcN Video Phone, Release 1.10
49
AddPac Technology Proprietary & Documentation
[Table 4-3]
Description of Input Mode
Name
Description
①
Character Set (F4)
To input letters in OSD by using the remote control, use Character Set. By using 4
function buttons of the remote control, you can have 6 different kinds of character
sets as they are shown in Figure 4-5. To enter the relevant letters, you need to press
the numeric keys of the remote control 1 to 3 times. To enter the next set of letters,
press the left or right button of the navigation key of the remote control for more
than 3 seconds..
②
Erase (F1)
Use the backspace key to correct an error made during the text entry.
③
Save/Edit (F2)
When the system is rebooted, all the values that have been entered disappear. Thus,
use this SAVE key to save all the values that have been entered. For some entries,
this key can be used as EDIT also.
f
Input Mode (F4)
Changes each character set each time the button is pressed in the order of
‘Lowercase Letters in English
Æ
Number
Æ
IPv6
Æ
Special Characters-
Æ
Korean
Æ
Capital Letter in English
.
