Additel 761A, User Manual

Page: 49 / 151

29
Table 3- 1 setting interface
Item Effective value Description
Stroke Round trip or one way Setting travel mode of auto step
Loop time 0-100 Setting loop time of auto step
Step mode Step point, percent, unit, default Incrementing mode of auto step
Cycle interval 0-3600 seconds Stop time between every cycle end and the next cycle start
Dwell time 0-3600 seconds The time is pressure stable at each step
Step quantity 2-17 The number of steps
Range Range will be based on the largest
range internal module
Setting auto step output range
Point list Point list is read only except when
“Custom” is selected for Step mode
Shows the pressure points of the auto step routine
7. Manual step
◆
Press or click on screen to achieve pressure output manual step.
◆
Click the middle number on icon to set up manual step value. The icon will be present when the split screen display