Additel 761A, User Manual

Page: 100 / 151

80
time, and then click the OK button to start the test.

When selecting the manual execution, after the set point is stable, it is required to click the next point button
to collect data and then input the new set point.

To stop this test, click the back button .
3. Save the result

Click the save button to save the test result.

The following items need to be entered: Name and serial number, click OK button to save the test results.

To exit without saving press the back button .

To redo the test click the reset button .
5.1.3 Pressure switch
Select the “pressure switch” icon in the test type list to start the quick test.
1. Connection

Connect the switch as shown in Figure 3-20.
2. Start the test

Click the zeroing button to reset the pressure control module;

Click the start button to select to enter the execution interface;