23
3. Thermometer
The Thermometer is one of the main functions of the device (figure 5). It can
measure RTD and TC, up to four channels can be displayed at the same time, each
channel measures a signal separately.
The icons
and
in the upper right corner indicate whether the current
temperature measurement channel is open, click them to open or close the
corresponding channel.
The measured signal value of the channel is displayed in the middle of the
channel in real time, and the current signal type information is displayed on the upper
left. Click the icon to switch the signal type. Click the menu icon
in the upper right
corner to set the current channel in the pop-up menu. Click the zeroing icon
(when the channel supports it) to perform the zeroing operation on the current
channel. If the signal type selected in the channel has multiple values for display (for
example, when measuring TC, in addition to the temperature value, there are also
the original mV signal value and the cold junction temperature value), then the
channel will also display the main signal value Other signal values are shown below.
Figure 5 Thermometer
Summary of Contents for 282
Page 1: ...282 Dual Channel Reference Thermometer Readout...
Page 2: ......
Page 20: ...1 4 Basic Structure Figure 1 Basic Structure...
Page 44: ......
