manualshive.com logo in svg

Addi-Data MSX-E1701, Manual, Page: 39 / 51

Share
Download
Addi-Data MSX-E1701 Manual Download Page 39

MSX-E1701: Digital I/O 

Software 

b) Software samples 

Table 7-2: Supported software samples for the  

Ethernet I/O module MSX-E1701 

Functionality Sample 

number 

Description 

Digital 

SAMPLE00 

Get the selected digital input information 

inputs 

SAMPLE01 

Read 1 digital input 

 

SAMPLE02 

Read 2 digital inputs 

 

SAMPLE03 

Read 4 digital inputs 

 

SAMPLE04 

Read 8 digital inputs 

 

SAMPLE05 

Read 16 digital inputs 

 

SAMPLE06 

Read 32 digital inputs 

Digital 

SAMPLE01 

Test 1 digital output with/without output memory option.  
Give the status of the digital output, if possible. 

outputs 

SAMPLE02 

Test 2 digital outputs with/without output memory option.  
Give the status of the digital outputs, if possible. 

 

SAMPLE03 

Test 4 digital outputs with/without output memory option.  
Give the status of the digital outputs, if possible. 

 

SAMPLE04 

Test 8 digital outputs with/without output memory option. 
Give the status of the digital outputs, if possible. 

 

SAMPLE05 

Test 16 digital outputs with/without output memory option. 
Give the status of the digital outputs, if possible. 

 

SAMPLE06 

Test 32 digital outputs with/without output memory option.  
Give the status of the digital outputs, if possible. 

Watchdog 

SAMPLE01 

Initialise and enable software trigger per key press. Start 1 
watchdog. Read the status as soon as the watchdog has run 
down. Reset the watchdog and exit the program. The user 
selects the watchdog he wants to test.  

 

SAMPLE02 

Initialise and enable software trigger per key press. Start 1 
watchdog with interrupt. Wait for the interrupt. Reset the 
watchdog and exit the program. The user selects the watchdog 
he wants to test.  

 

 

 

 39 

Summary of Contents for MSX-E1701




















































Reviews:

No comments