The reminder banner
As many computer screen layouts can
appear very similar, the AdderView
PRO provides a reminder banner option
that indicates which computer channel
you are currently viewing. The banner is displayed at the top of the screen for
an adjustable interval between one and five seconds (it can also be disabled or
limited to only show when you exit the on-screen menu). You can:
• Change the overall colour scheme,
• Change the dwell time for the banner, or
• Determine when the banner is shown.
To change banner colours
1 Display the
Configuration menu
.
2 Highlight the ‘Global Preferences’ option and press
to select.
3 Highlight the ‘OSD Colour’ option and press
repeatedly until the
desired colour combination is displayed.
4 Press to save the settings. Press twice more to return to the computer
channel and view your changes.
To change dwell time for the banner
1 Display the
Configuration menu
.
2 Highlight the ‘OSD Dwell Time’ option and press
repeatedly until the
required time is shown is displayed (between 1 and 5 seconds).
3 Press to save the settings. Press twice more to return to the computer
channel and view your changes.
To determine when the banner is shown
1 Display the
Configuration menu
.
2 Highlight the ‘Global Preferences’ option and press
to select.
3 Highlight the ‘Reminder Banner’ option and press
until the required
settings is displayed:
• ‘ALWAYS’ will show the banner after every channel change,
• ‘AFTER OSD’ will show the banner only when you exit from the on-
screen menu.
• ‘NEVER’ will disable the banner
4 Press to save the settings. Press twice more to return to the computer
channel and view your changes.
Please see
Appendix 1
for more configuration details.
Computer
Port
Computer 01
01
12
Editing the computer list
To create/edit computer entries
1 Display the
Display the
Configuration menu
.
2 Highlight ‘Edit Computer List’ and press
. The ‘Edit Computer List’ menu
will be displayed.
3 Either:
•
Create a new computer entry
– Press and enter a new name, or
•
Edit an existing computer entry
– Highlight a computer name and press
. Press
(Backspace) to delete existing characters and enter the
required new name (up to 16 characters).
Note: Avoid creating two names for the same computer channel.
Avoid creating two names for the same computer channel.
4 Press
and the cursor will move to the computer channel column. Change
or enter the channel address of the computer as required.
5 Optional: While the entry is highlighted, press to add/remove the
‘x’ marker at the right side - this will determine whether or not the
corresponding computer will be included autoscanning scan list - see
Autoscanning
for more details.
6 When the channel address is complete, press
.
7 When all settings have been made, press
to save and exit. Press to
return to the ‘Configuration Menu’.
ADDERVIEW PRO
Edit Computer List
Computer 01
01
x
Computer 02
02
x
Computer 03
03
x
Computer 04
04
x
Computer 05
05
x
Computer 06
06
x
Computer 07
07
x
Computer 08
08
x
Ins–Add
Esc–Quit
Enter–Edit
X–Autoscan
F3–Find
Del–Delete
–Select
When an entry is marked with a
‘x’, the corresponding computer
will be included within an
autoscanning operation when
‘SCAN LIST’ is chosen as the
autoscan mode. See Autoscanning
for more details.
