AdderLink X-Series
Installation and Use
Page 50
directly into the back of the computer.
This configuration might seem strange to you because the keyboard port on the X-
KVM
remote
receiver would normally be connected to a keyboard and not to a
computer keyboard port. The product is designed to reverse the operation of the
keyboard port during the flash upgrade process.
STEP 6 (upgrading the
remote
receiver)
Set the X-KVM’s option switch 1 to the ON position. Power the X-KVM
remote
receiver by connecting the power adapter. Insert the DOS disk into your computer’s
floppy drive and power on your computer. The upgrade should be performed
automatically. When the upgrade has completed, switch off your computer and
disconnect the
remote
receiver. Set option switch 1 back to the OFF position.
Reconnect the upgraded X-KVM as shown in figure 6.
All manuals and user guides at all-guides.com
