AdderLink X-Series
Installation and Use
Page 28
If you have switched off your X-KVM or you are attempting to ‘hot plug’ it into a
system that is already running, you may be able to restore lost mouse movement
using the X-KVM's mouse restoration functions.
Mouse restoration functions should be used with care as unpredictable
results may occur if the wrong mouse type is selected. If in doubt restore the
mouse by powering down the PC normally.
Standard PS/2 mouse data uses a different data format to IntelliMouse data and so
two reset functions are provided on the X-KVM. The type of data format expected by
the PC depends upon the driver and the type of mouse that was connected when
the driver was booted. The following table may be used as a guide.
Note that the mouse reset functions predict the likely mouse resolution settings but
may not restore the speed or sensitivity of the mouse exactly as they were when the
PC originally booted.
Type of mouse / system Driver type
Likely expected Suggested
Connected at bootup
data format
restoration
PS/2
PS/2 only
PS/2
M6
PS/2
IntelliMouse
PS/2
M6
IntelliMouse / KVM Switch PS/2 only
PS/2
M6
IntelliMouse/ KVM Switch
IntelliMouse
IntelliMouse
M7
To restore lost mouse movement on a CPU connected to the X-KVM:
1)
Ensure that the video picture of the CPU that has lost its mouse movement is
displayed on the monitor connected to the
remote
unit.
2)
Enter the configuration mode by pressing ‘HOTKEYS’ and RETURN on the
keyboard connected to the
remote
unit. For example:
b j
f
3)
To restore a PS/2 mouse connection press
M 6 f
Or, to restore an IntelliMouse connection press
M 7 f
All manuals and user guides at all-guides.com
