Arnouse Digital Devices
User Guide
SR20-FDD
Version 1.0
© Arnouse Digital Devices 2022. All rights reserved.
Page 11 of 35
2.3
Environment
The system is intended to be used in an environmentally controlled and secured facility. The
following system components are required for installation and remote-control operation.
•
Rack Slides (not provided)
•
Remote KVM Transceiver Unit (purchased separately)
•
Fiber Optic cable (length determined by the end user)
•
Laptop or PC with an Ethernet NIC for Remote Control Operation
•
Laptop or PC with a Serial Communications Port for Switch Management
•
Routers with 10G SFP+ Port
2.4
System Operations
The SR20-FDD can operate unattended once is properly installed and configured for remote
KVM operation. The remote users can have as much control of each PC Card as allowed by the
system administrator. Each user may be able to login and logout of the PC Card and operate
applications also as allowed by the System Administrator. However, System power controls and
switch management functions are not available to the user and must be accomplished from a
PC or laptop connected to the power and switch management ports on the rear panel of the
unit. These functions are password protected and available only to the System Administrator.
