8
WWW.ADDC.NET | 516.673.4444 | [email protected] | ALL PRODUCTS ARE PROUDLY MADE IN THE USA
Section 2.3 - Installing Your BioDigitalPC
®
s
BioDigitalPC
®
s are hot-pluggable, meaning technicians do not need to remove power to begin adding or
removing them.
Section 2.3.1 - Removing the SR-20RM Top Cover:
In order to add or remove BioDigitalPC
®
s the SR-20RM chassis can be pulled out of the rack, or the SR-
20RM's Top Cover needs to be removed temporarily.
SR-20RM system can be running while installing new server cards.
Only trained technicians are authorized to work beneath the SR-20RM System Cover and access any
of the components inside the system.
Section 2.3.2 - Installing a BioDigitalPC
®
Step 3:
Insert Card with
"Arnouse Digital Devices
Corp." facing upwards
and the connector of the
card is facing towards the
latch. When inserting the
card place between the
two horizontal metal bars,
ensuring the card is going
to be aligned properly.
Step 4:
Once the card
is in between the two
horizonal bars, locate
the small locking tab and
push it in towards the
card. The card should
now be locked into place.
Fully inserted card
Step 1:
Make
sure the latch is
perpendicular to
the system cover.
Step 2:
Make sure
locking tab is unlocked.
small
locking tab
latch
