page 19
ADDAC SYSTEM
The Minimum value for this setting is 0 Octaves (Button 1) and the maximum is +9
Octaves (Button 10).
This allows for negative voltages up to -5v to be quantized as well. In this case if
Oct.Ofs setting is set to 5 octaves -5v will be quantized to 0v, -4v to 1v and so on.
If Quantized Notes fall off the modules voltage range they will be quantized to the
lowest or highest note possible.
So let’s imagine we have already pressed the
OCT.OFS.
Button for aprox. 1 second
and entered in its Menu Window, the Menu Buttons already changed to the configu-
ration shown in image 1, displaying the default setting for Octave Offset or Button 1
(0 Octaves Offset).
This setting is shared by all 4 Voices.
Default value is 0 Octaves Offset (Button 1).
If it’s the User’s wish to change the Octave Offset to any
other value he’ll need to press the desired button twice.
Let’s assume Button 2 (1 octaves Offset)
Once Button 2 is lit (image 2) pressing it once again
confirms the new setting and Exits the Menu Window.
Here’s a Table With the Offset values for each Menu
Button:
Image 2
Image 1
INTUITIVE MENU
OCT.OFS.
- Octave Offset Operation
- Buttons 1 to 10
Ex. VI
BUTTON 1
0 Octaves
BUTTON 2
1 Octaves
BUTTON 3
2 Octaves
BUTTON 4
3 Octaves
BUTTON 5
4 Octaves
BUTTON 6
5 Octaves
BUTTON 7
6 Octaves
BUTTON 8
7 Octaves
BUTTON 9
8 Octaves
BUTTON 10
9 Octaves
ADDAC207 INTUITIVE QUANTIZER
USER’S GUIDE
April.2021
Revision.05
Summary of Contents for ADDAC207
Page 1: ......