page 10
ADDAC SYSTEM
INTUITIVE MENU
OVERALL OPERATION PROCEDURES
All Quantizer Operation Settings are defined through
the same Push-Buttons as Scale selection and
Keyboard.
For Menu related Access the Push-Button needs to be
pressed for aprox. 1 second after which the Leds
change to give User the necessary feedback to
acknowledge his input.
Once this happens the Module is already in the
Menu
Windows
recalled by the User.
In these Windows you’ll see the active setting identi-
fied by the only button that will be lit.
Pressing a non-lit button changes the setting to that
selection while, at the same time, changes the lit
button for visual feedback.
Pressing a lit button is always the confirmation of the
desired setting and it automatically jumps out of the
Menu Window back to the previous Main Mode (QUAN-
TIZER / KEYBOARD) Window changing the leds as
well.
While in any Menu Window, after 5 seconds of inactiv-
ity with the Menu Buttons the Module automatically
jumps out of the Menu Window back to the previous
Main Mode (QUANTIZER / KEYBOARD) Window chang-
ing the leds as well.
The User can jump to Menu Windows from inside other
Menu Windows using the same Press and Hold for
aprox. 1 second procedure. However if settings were
changed they will not be saved.
COLOR CODING
Buttons are numbered in Yellow from 1 to 12, other
color engravings are coded depending on their func-
tion:
Black is used for Overall settings
Yellow is used for Chords Generation Settings
Blue is used for Scale Temeprament and Fine Tunning
Settings
White is used for Scale Mode Settings (Iorian, Dorian...)
ADDAC207 INTUITIVE QUANTIZER
USER’S GUIDE
April.2021
Revision.05
Summary of Contents for ADDAC207
Page 1: ......