November 2018
Beverage Temperature Adjustment (FIG.8)
1. Every dispenser has been tested and the thermostat has been set at
+
5ºC
temperature.
2. To adjust this temperature
,
lift up the plastic cover and turn the thermostat knob
clockwise to set a lower temperature
.
CAUTION:
Before adjusting temperature, always remove the power plug.
It is suggested that you do not reset the temperature controller frequently.
USEFUL INFORMATION:
For health standard and good quality of beverages
,
clean bowls
, lids
and the
mixing paddles as often as possible
.
Cautions:
a. Before carrying out cleaning and refilling, remove the power plug
.
b. Do not use abrasive powders that might impair bowls and the lid's shine.
c. Use neutral soap and a little warm water to wash container
,
lid,
mixing paddles/pump, refrigerator tank, and tap
.
Rinse carefully with
water in order to remove any residual of soap.
d. To maintain a high standard of flavor, leave the dispenser turned on
night and day in order to avoid deposit.
e. If the dispenser
is
out of use for a long time, remove the power plug and
clean all parts carefully
.
Keep the dispenser away from dust and cover
it
with a plastic sheet.
Servicing:
Dispenser servicing
is
very simple
.
After disconnecting the dispenser. Remove
panels and clean inside parts
,
especially condenser fins
,
with a brush
.
(FIG.7)
Dust reduces the performance of the machine
,
so clean at least once a month
.